Download the Storage Manager RPM for your card model and architecture from their site http:\/\/www.adaptec.com\/en-US\/support\/raid\/<\/p>\n
If you run \/usr\/StorMan\/arcconf and get this error:<\/p>\n
\n.\/arcconf: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory\n<\/p><\/blockquote>\n
Do this<\/p>\n
\nexport LD_PRELOAD=\/usr\/StorMan\/libstdc++.so.5\n<\/p><\/blockquote>\n
\nroot@r StorMan]# .\/arcconf \n\n | UCLI | Adaptec uniform command line interface\n | UCLI | Version 5.30 (B17509)\n | UCLI | (C) Adaptec 2003-2008\n | UCLI | All Rights Reserved\n\n COPYBACK | toggles controller copy back mode\n CREATE | creates a logical device\n DATASCRUB | toggles the controller background consistency check mode\n DELETE | deletes one or more logical devices\n FAILOVER | toggles the controller autotomatic failover mode\n SNAPSHOT | creates a copy of a logical device\n GETCONFIG | prints controller information\n GETLOGS | gets controller log information\n GETSTATUS | displays the status of running tasks\n GETVERSION | prints version information for all controllers\n IDENTIFY | blinks LEDS on device(s) connected to a controller\n KEY | installs a Feature Key onto a controller\n MODIFY | performs RAID Level Migration or Online Capacity Expansion\n RESCAN | checks for new or removed drives\n ROMUPDATE | updates controller firmware\n SETALARM | controls the controller alarm, if present\n SETCONFIG | restores the default configuration\n SETCACHE | adjusts physical or logical device cache mode\n SETNAME | renames a logical device given its logical device number\n SETPRIORITY | changes specific or global task priority\n SETSTATE | manually sets the state of a physical or logical device\n TASK | performs a task such as build\/verify on a physical or logical device\n<\/pre>\nGet info<\/p>\n
\n[root@r StorMan]# .\/arcconf getconfig 1\nControllers found: 1\n----------------------------------------------------------------------\nController information\n----------------------------------------------------------------------\n Controller Status : Optimal\n Channel description : SAS\/SATA\n Controller Model : Adaptec 3405\n Controller Serial Number : 7C2102FD\n Physical Slot : 3\n Temperature : 32 C\/ 89 F (Normal)\n Installed memory : 128 MB\n Copyback : Disabled\n Background consistency check : Disabled\n Automatic Failover : Enabled\n Defunct disk drive count : 0\n Logical devices\/Failed\/Degraded : 1\/0\/0\n --------------------------------------------------------\n Controller Version Information\n --------------------------------------------------------\n BIOS : 5.2-0 (12379)\n Firmware : 5.2-0 (12379)\n Driver : 1.1-5 (2409)\n Boot Flash : 5.2-0 (12379)\n --------------------------------------------------------\n Controller Battery Information\n --------------------------------------------------------\n Status : Optimal\n Over temperature : No\n Capacity remaining : 99 percent\n Time remaining (at current draw) : 3 days, 1 hours, 11 minutes\n\n----------------------------------------------------------------------\nLogical device information\n----------------------------------------------------------------------\nLogical device number 0\n Logical device name : raid 10\n RAID level : 10\n Status of logical device : Optimal\n Size : 139798 MB\n Stripe-unit size : 256 KB\n Read-cache mode : Enabled\n Write-cache mode : Enabled (write-back)\n Write-cache setting : Enabled (write-back) when protected by battery\n Partitioned : Yes\n Protected by Hot-Spare : No\n Bootable : Yes\n Failed stripes : No\n --------------------------------------------------------\n Logical device segment information\n --------------------------------------------------------\n Group 0, Segment 0 : Present (0,0) 3LQ1330009747KV9\n Group 0, Segment 1 : Present (0,1) 3LQ1SJ7009747KHQ\n Group 1, Segment 0 : Present (0,2) 3LQ2TB3009746GYX\n Group 1, Segment 1 : Present (0,3) 3L17LJ6009750G35\n\n\n----------------------------------------------------------------------\nPhysical Device information\n----------------------------------------------------------------------\n Device #0\n Device is a Hard drive\n State : Online\n Supported : Yes\n Transfer Speed : SAS 3.0 Gb\/s\n Reported Channel,Device : 0,0\n Reported Location : Connector 0, Device 0\n Vendor : SEAGATE\n Model : ST373455SS\n Firmware : 0002\n Serial number : 3LQ1323Y00009747KV9\n World-wide name : 5000C50004962A3\n Size : 70007 MB\n Write Cache : Enabled (write-back)\n FRU : None\n S.M.A.R.T. : No\n Device #1\n Device is a Hard drive\n State : Online\n Supported : Yes\n Transfer Speed : SAS 3.0 Gb\/s\n Reported Channel,Device : 0,1\n Reported Location : Connector 0, Device 1\n Vendor : SEAGATE\n Model : ST373455SS\n Firmware : 0002\n Serial number : 3LQ12SJ70747KHQ\n World-wide name : 5000C50004961D8\n Size : 70007 MB\n Write Cache : Enabled (write-back)\n FRU : None\n S.M.A.R.T. : No\n Device #2\n Device is a Hard drive\n State : Online\n Supported : Yes\n Transfer Speed : SAS 3.0 Gb\/s\n Reported Channel,Device : 0,2\n Reported Location : Connector 0, Device 2\n Vendor : SEAGATE\n Model : ST373455SS\n Firmware : 0002\n Serial number : 3LQ12T009746GYX\n World-wide name : 5000C500049604F\n Size : 70007 MB\n Write Cache : Enabled (write-back)\n FRU : None\n S.M.A.R.T. : No\n Device #3\n Device is a Hard drive\n State : Online\n Supported : Yes\n Transfer Speed : SAS 3.0 Gb\/s\n Reported Channel,Device : 0,3\n Reported Location : Connector 0, Device 3\n Vendor : SEAGATE\n Model : ST373455SS\n Firmware : 0002\n Serial number : 3LQ17LJ60000G35\n World-wide name : 5000C500049FE35\n Size : 70007 MB\n Write Cache : Enabled (write-back)\n FRU : None\n S.M.A.R.T. : No\n\n\nCommand completed successfully.\n<\/pre>\n","protected":false},"excerpt":{"rendered":"Download the Storage Manager RPM for your card model and architecture from their site http:\/\/www.adaptec.com\/en-US\/support\/raid\/ If you run \/usr\/StorMan\/arcconf and get this error: .\/arcconf: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory Do this export LD_PRELOAD=\/usr\/StorMan\/libstdc++.so.5 root@r StorMan]# .\/arcconf | UCLI | Adaptec uniform command line interface […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[9],"tags":[],"_links":{"self":[{"href":"http:\/\/blog.trungson.com\/index.php?rest_route=\/wp\/v2\/posts\/231"}],"collection":[{"href":"http:\/\/blog.trungson.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/blog.trungson.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/blog.trungson.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/blog.trungson.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=231"}],"version-history":[{"count":0,"href":"http:\/\/blog.trungson.com\/index.php?rest_route=\/wp\/v2\/posts\/231\/revisions"}],"wp:attachment":[{"href":"http:\/\/blog.trungson.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=231"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/blog.trungson.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=231"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/blog.trungson.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=231"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}